基于有限元法的海上升压站组件吊耳强度计算
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Calculation for Hanger Strength of Offshore Substation Components Based on Finite Element Method
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为保证海上升压站正常安装,对导管架和上部组块的吊耳进行有限元建模、网格划分、工况施加等步骤,然后进行计算与分析,以实现对组件吊耳的强度校核。经项目验证,基于有限元法进行的吊耳强度校核计算结果满足使用条件,并且能够有效解决实体模型上集中载荷的施加问题。

    Abstract:

    In order to ensure the normal installation of offshore substation, the steps such as finite element modelling, meshing and working condition applying of the ranger of the jacket and upper block are performed, and the calculation and analysis are conducted to complete the hanger strength check. According to the project verification, the calculation results of the hanger strength based on the finite element method satisfy the service conditions, and can effectively solve the problem of applying concentrated load on the solid model.

    参考文献
    相似文献
    引证文献
引用本文

蔡东,贾献林,王玮哲.基于有限元法的海上升压站组件吊耳强度计算[J].中国海洋平台,2020,(05):

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2020-11-06
  • 出版日期: