海洋柔性管缆防弯器连接结构的几何参数优化
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Geometric Parameters Optimization of Bend Stiffener’s Connection Structure for Marine Flexible Pipes and Cables
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为实现对海洋柔性管缆防弯器连接结构几何参数科学合理的设计,建立数值模型,采用正交试验法对连接结构进行分析。运用Abaqus软件建立包含连接结构的防弯器-海缆耦合数值模型,并设计等比例试验验证模型。通过设计正交试验,改变连接结构的5个几何参数,建立并计算16个数值模型,得到5个几何参数对防弯器性能指标影响的主次顺序和优设计区间。结果表明:该耦合数值模型和分析方法可为防弯器连接结构的设计提供有效指导;内套长度与圆柱外径对防弯器性能指标影响最大,应重点分析。

    Abstract:

    In order to realize the scientific and reasonable design of geometric parameters of bend stiffener’s connection structure for marine flexible pipes and cables, a numerical model is established and the connection structure is analyzed by the orthogonal test. The bend stiffener-marine cable coupling model which considers the connection structure is established by Abaqus and verified by an equal proportion test. By designing an orthogonal test, 5 geometric parameters of the connection structure are changed, 16 numerical models are established and calculated, and the order and appropriate design intervals of the influence of 5 geometric parameters on each performance index of the bend stiffener are obtained. The results show that: the numerical coupling model and analysis method can provide guidance for the design of bend stiffener’s connection structure; the length of the inner sleeve and the outer diameter of the cylinder are of the greatest impact on the performance index of the bend stiffener, and the analysis of these two geometric parameters should be focused on.

    参考文献
    相似文献
    引证文献
引用本文

石鸿毅,陈金龙,岳前进,陈琰霏,卢青针.海洋柔性管缆防弯器连接结构的几何参数优化[J].中国海洋平台,2021,(06):59-64

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2021-12-17
  • 出版日期: